10-23-2020 05:15 AM
Hi all,
i just doing testing here on ASR1001. I have hardware issue with ASR1000 before but already solved it.
right now I cannot ping ASR1001 to my laptop to test the connection. This is my 1st time configure ASR1001 btw.
I show you my config, hope anyone can help me.
Router#sh run
Building configuration...
Current configuration : 1663 bytes
!
! Last configuration change at 02:59:43 UTC Fri Oct 23 2020
!
version 15.5
service timestamps debug datetime msec
service timestamps log datetime msec
no platform punt-keepalive disable-kernel-core
!
hostname Router
!
boot-start-marker
boot system flash asr1001-universalk9.03.16.06.S.155-3.S6-ext.bin
boot system flash bootflash:asr1001-universalk9.03.16.06.S.155-3.S6-ext.bin
boot-end-marker
!
!
vrf definition Mgmt-intf
!
address-family ipv4
exit-address-family
!
address-family ipv6
exit-address-family
!
!
no aaa new-model
!
!
!
!
!
!
ipv6 multicast rpf use-bgp
!
!
!
!
!
!
!
subscriber templating
multilink bundle-name authenticated
!
!
license udi pid ASR1001 sn JAE171400HR
!
!
!
redundancy
mode none
!
!
!
!
!
!
!
!
interface GigabitEthernet0/0/0
no ip address
negotiation auto
!
interface GigabitEthernet0/0/1
no ip address
negotiation auto
!
interface GigabitEthernet0/0/2
ip address 10.0.0.1 255.255.255.0
speed 1000
no negotiation auto
!
interface GigabitEthernet0/0/3
no ip address
negotiation auto
!
interface GigabitEthernet0/1/0
no ip address
negotiation auto
!
interface GigabitEthernet0/1/1
no ip address
negotiation auto
!
interface GigabitEthernet0/1/2
no ip address
negotiation auto
!
interface GigabitEthernet0/1/3
no ip address
negotiation auto
!
interface GigabitEthernet0/1/4
no ip address
negotiation auto
!
interface GigabitEthernet0
vrf forwarding Mgmt-intf
no ip address
negotiation auto
!
ip forward-protocol nd
!
no ip http server
no ip http secure-server
ip tftp source-interface GigabitEthernet0
!
!
!
!
control-plane
!
!
line con 0
stopbits 1
line aux 0
stopbits 1
line vty 0 4
login
!
!
end
Router#
Router#
Router#
Router#ping 10.0.0.2
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.0.0.2, timeout is 2 seconds:
.....
Success rate is 0 percent (0/5)
Router#
Solved! Go to Solution.
10-23-2020 05:17 AM
Hello
turn off any software firewall on your pc and test again
10-23-2020 05:25 AM
windows FW issue - off and try again.
10-23-2020 05:17 AM
Hello
turn off any software firewall on your pc and test again
10-23-2020 10:03 AM
Hi Paul,
thanks for the solution. its work!
10-23-2020 05:25 AM
windows FW issue - off and try again.
10-23-2020 06:29 AM
Hello @Vinnfier93 ,
just in addition it could be better to avoid to force speed to 1000 and to disable negotiation
interface GigabitEthernet0/0/2
ip address 10.0.0.1 255.255.255.0
speed auto
negotiation auto
Hope to help
Giuseppe
10-23-2020 07:34 AM
I agree with my colleagues who are suggesting that this might be an issue with a firewall on the PC not allowing ping. But I think we may also need to consider some other possibilities. Are we sure that the PC is connected to the expected interface? Perhaps the output of show interface for the connected interface or of show ip interface brief might provide helpful information. Also please try the ping again and then immediately do show arp and post the output. This would demonstrate whether there is layer 2 communication or not.
10-23-2020 09:29 AM
Hello,
what if you use GigabitEthernet0/0/2 as source ?
ASR1001#ping 10.0.0.2 source interface GigabitEthernet0/0/2
10-23-2020 10:33 AM
Hi all,
I tried to copy the iOS, but it didn't successful. Attached is the output
Router#
Router#copy flash
Router#copy bo
Router#copy bootflash: tf
Router#copy bootflash: tftp:
Source filename []? asr1001-universalk9.03.16.06.S.155-3.S6-ext.bin
Address or name of remote host []? 10.0.0.2
Destination filename [asr1001-universalk9.03.16.06.S.155-3.S6-ext.bin]?
.....
%Error opening tftp://10.0.0.2/asr1001-universalk9.03.16.06.S.155-3.S6-ext.bin (Timed out)
10-23-2020 10:38 AM
Hello
is 10.0.0.2 running as a tftp server? if not it won’t work-
if you need one you could download a free tftp server here
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide