12-15-2022 04:58 AM
Hi, I am currently trying to let all the PC to ping to the server. Can someone help me configure and explain to me where i go wrong thx.
12-15-2022 07:23 AM
Hi Fangerino ,
Only the PC's connected in the LAN of the middle router are able to ping the server because the server is in the same subnet as the middle router so no need to add a static route but the other two routers don't have route to the server , add a static route for the server on both the routers and then the PC's in those LANS would also be able to ping the server
12-15-2022 11:17 AM
12-15-2022 04:53 PM
as mentioned above earlier , you need to add static routes; routes are to and from source/destination; and every single router must have route to all networks you want to reach . i,.e. missing route on R1 to reach Server is
ip route 10.0.3.16 255.255.255.240 192.168.2.1
add this one and floor 6 is ok but not floor 5. in case of floor 5, return path back to PC is not there.
I think there are several routes that are not correct; also , u have RIP v1 configured; which may or may not cause issues. if you want to use RIP, it must be version 2 and no auto summary set.
Regards, ML
**Please Rate All Helpful Responses **
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide