channelised DS3 module on 7200

[prathikr]

Hello All , 

Need to know if 7200 supports channelised DS3 , we use PA-2T3 card only to realise later that it supports only clear-channel 

Kinldy let me know if we can use any modules that support channelised DS3 on 7200 

Appreciate quick response. 

[Venkatesh Perumal]

i can see the channelized T3 dual-wide port adapter (PA-CT3/4T1) can be used in Cisco 7200 series routers, below is the reference doc for the same.

http://www.cisco.com/c/en/us/td/docs/interfaces_modules/port_adapters/install_upgrade/multichannel_serial/channelized-t3_dual-wide_install_config/4584ct3d.pdf

http://www.cisco.com/c/en/us/td/docs/interfaces_modules/port_adapters/install_upgrade/multichannel_serial/pa-mc-2t3-_multichannel_t3_install_config/mc_2t3/3526ov.html#wp1029882

-Do rate if it helps

[prathikr]

Thank you fir the quick response venperum , this should help

[Masoud Pourshabanian]

Hello,

Adding to venperum

Take look at this also,  PA-MC-2T3-EC

www.cisco.com/c/en/us/td/docs/interfaces_modules/port_adapters/install_upgrade/multichannel_serial/pa-mc-t3-ec_install_config/mc-t3ec.pdf

Masoud

[prathikr]

Thank you Masoud ,appreciate your help 

[Masoud Pourshabanian]

You are most welcome.