09-09-2011 06:19 PM - edited 03-04-2019 01:33 PM
Hello,
I was just wondering, what the Loopback LED does when it is on. Also, I have not been able to get this LED to turn on. Please can you tell me how I can get this working.
Also, is the VPN capability only included if I upgrade to another version of IOS. I am currently on the broadband-mz version 150-1. M4.bin
Thanks,
Jonathan Worth.
09-09-2011 06:36 PM
Hi,
From the installation guide here is the explanation for LED light
LPBK | Steady green—Router DSL interface is in loopback mode. Off—Router DSL interface is operating in normal mode. |
for more info refer to this doc:
http://www.cisco.com/en/US/docs/routers/access/1800/1801/hardware/quick/guide/1801qsg.html
For VPN/Security, you may need a new IOS with that feature set
HTH
09-11-2011 12:56 PM
Hello,
How do I take advantage of the using this loopback feature because i have set Dialer0 to loopback however, this does not seem to be working - I get no light up after setting this option.
Thanks.
Jonathan Worth.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide