Hello
I cannot seem to get our 1921 with a 4g EHWIC card added.
We want to use ADSL as a main connection and 4G as a backup. I've struggled so much with the 4G EHWIC that I deleted the entire ADSL config just to try and get cellular working and it does not work. The provider is EE. It can see the sim card but nothing seems to happen. I don't get any (useful) debug output either.
Building configuration...
Current configuration : 4970 bytes
!
! Last configuration change at 14:39:54 UTC Wed Sep 16 2015 by truebyte
version 15.2
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
service internal
!
hostname R1
!
boot-start-marker
boot-end-marker
!
!
!
aaa new-model
!
!
aaa authentication login default local
aaa authorization console
aaa authorization exec default local
!
!
!
!
!
aaa session-id common
!
ip cef
!
!
!
!
!
!
!
!
!
!
ip inspect WAAS flush-timeout 10
no ipv6 cef
!
multilink bundle-name authenticated
!
chat-script lte "" "AT!CALL" TIMEOUT 60 "OK"
!
!
!
!
!
username ** privilege 15 secret 5 ***
!
redundancy
notification-timer 60000
!
!
!
!
!
controller Cellular 0/1
!
controller VDSL 0/0/0
!
!
class-map type inspect match-any ZBF-CLASS
match access-group name INSIDE_TO_OUTSIDE
match protocol http
match protocol https
match protocol icmp
match protocol dns
match protocol smtp
match protocol ssh
match protocol ftp
match protocol ftps
match protocol imap
match protocol ica
match protocol telnet
!
policy-map type inspect ZBF-POLICY
class type inspect ZBF-CLASS
inspect
class class-default
drop
!
zone security inside
zone security outside
zone-pair security INSIDE_TO_OUTSIDE source inside destination outside
service-policy type inspect ZBF-POLICY
!
!
!
!
!
!
!
!
!
interface Embedded-Service-Engine0/0
no ip address
shutdown
!
interface GigabitEthernet0/0
description LAN PORT
ip address 10.110.10.1 255.255.255.0
ip nat inside
ip virtual-reassembly in
zone-member security inside
shutdown
duplex auto
speed auto
!
interface GigabitEthernet0/1
description FIBRE PORT
no ip address
shutdown
duplex auto
speed auto
!
interface ATM0/0/0
no ip address
shutdown
no atm ilmi-keepalive
!
interface Ethernet0/0/0
no ip address
shutdown
!
interface Cellular0/1/0
ip address negotiated
ip nat outside
ip virtual-reassembly in
encapsulation slip
dialer in-band
dialer idle-timeout 60
dialer string lte
dialer-group 1
async mode interactive
!
interface Dialer0
no ip address
!
ip local pool VPN_POOL 10.7.99.10 10.7.99.30
ip forward-protocol nd
!
ip http server
ip http authentication local
ip http secure-server
!
ip nat inside source list NAT interface Dialer0 overload
ip nat inside source static tcp 10.110.10.40 25 81.86.54.139 25 extendable
ip nat inside source static tcp 10.110.10.40 443 81.86.54.139 443 extendable
ip route 0.0.0.0 0.0.0.0 Cellular0/1/0
!
ip access-list extended INSIDE_TO_OUTSIDE
permit ip 10.110.10.0 0.0.0.255 any
ip access-list extended LAN
ip access-list extended NAT
remark NO NAT STATEMENT
deny ip 10.110.10.0 0.0.0.255 10.7.99.0 0.0.0.255
remark NAT THE REST
permit ip 10.110.10.0 0.0.0.255 any
!
!
!
!
!
!
control-plane
!
!
!
line con 0
transport output none
line aux 0
no exec
transport input all
transport output all
line 2
no activation-character
no exec
transport preferred none
transport output all
stopbits 1
line 0/1/0
exec-timeout 0 0
script dialer lte
modem InOut
no exec
transport preferred none
transport input all
transport output none
line vty 0 4
transport input telnet ssh
line vty 5 15
transport input telnet ssh
!
scheduler allocate 20000 1000
!
end
R1# show interfaces cellular 0/1/0
Cellular0/1/0 is up (spoofing), line protocol is up (spoofing)
Hardware is 4G WWAN EHWIC - Global Multimode LTE/DC-HSPA+/HSPA+/HSPA/UMTS/EDGE/GPRS
Internet address will be assigned dynamically by the network
MTU 1500 bytes, BW 9 Kbit/sec, DLY 100000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation SLIP, loopback not set
Keepalive not supported
Last input never, output never, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/10 (size/max)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts (0 IP multicasts)
0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 packets output, 0 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 unknown protocol drops
0 output buffer failures, 0 output buffers swapped out
0 carrier transitions
DCD=down DSR=down DTR=up RTS=up CTS=up
R1#show cellular 0/1/0 all
Hardware Information
====================
Modem Firmware Version = SWI9200X_03.05.19.04
Modem Firmware built = 2012/09/17 17:57:14
Hardware Version = 10
International Mobile Subscriber Identity (IMSI) = 234304113458925
International Mobile Equipment Identity (IMEI) = 359470040026454
Integrated Circuit Card ID (ICCID) = 8944303081950296845
Mobile Subscriber International Subscriber
IDentity Number (MSISDN) = 447719598138
Profile Information
====================
Profile 1 = INACTIVE*
--------
PDP Type = IPv4
Access Point Name (APN) = everywhere
Authentication = PAP
Username: eesecure
Password: secure
* - Default profile
Data Connection Information
===========================
Data Transmitted = 0 bytes, Received = 0 bytes
Profile 1, Packet Session Status = INACTIVE
Inactivity Reason = Unknown
Profile 2, Packet Session Status = INACTIVE
Inactivity Reason = Unknown
Profile 3, Packet Session Status = INACTIVE
Inactivity Reason = Unknown
Profile 4, Packet Session Status = INACTIVE
Inactivity Reason = Unknown
Profile 5, Packet Session Status = INACTIVE
Inactivity Reason = Unknown
Profile 6, Packet Session Status = INACTIVE
Inactivity Reason = Unknown
Profile 7, Packet Session Status = INACTIVE
Inactivity Reason = Unknown
Profile 8, Packet Session Status = INACTIVE
Inactivity Reason = Unknown
Profile 9, Packet Session Status = INACTIVE
Inactivity Reason = Unknown
Profile 10, Packet Session Status = INACTIVE
Inactivity Reason = Unknown
Profile 11, Packet Session Status = INACTIVE
Inactivity Reason = Unknown
Profile 12, Packet Session Status = INACTIVE
Inactivity Reason = Unknown
Profile 13, Packet Session Status = INACTIVE
Inactivity Reason = Unknown
Profile 14, Packet Session Status = INACTIVE
Inactivity Reason = Unknown
Profile 15, Packet Session Status = INACTIVE
Inactivity Reason = Unknown
Profile 16, Packet Session Status = INACTIVE
Inactivity Reason = Unknown
Network Information
===================
Current Service Status = Normal
Current Service = Packet switched
Current Roaming Status = Home
Network Selection Mode = Automatic
Mobile Country Code (MCC) = 234
Mobile Network Code (MNC) = 30
Packet switch domain(PS) state = Attached
Registration(EMM) state = Registered
Radio Information
=================
Radio power mode = ON
Current RSSI = -75 dBm
LTE Technology Preference = AUTO
LTE Technology Selected = LTE
Modem Security Information
==========================
Card Holder Verification (CHV1) = Disabled
SIM Status = OK
SIM User Operation Required = None
Number of CHV1 Retries remaining = 3
Error Information
=================
This command is not supported on 4G modems.
Modem Crashdump Information
===========================
Modem crashdump logging: off
R1#ping 8.8.8.8
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 8.8.8.8, timeout is 2 seconds:
.....
Success rate is 0 percent (0/5)
Anyone got any idea what is going on or what I can try next?
Thanks in advance.
Mark
