03-17-2016 12:20 AM - edited 03-05-2019 03:35 AM
Hello all,
I know that CISCO 881 supports VLAN commands.
So, I'm wondering whether CISCO 2651 can support VLAN commands.
Actually, I'm planning to use below commands!
1. vlan---------------------
vlan 10
interface vlan 10
2. router on a stick---------------------
interface f0.10
description VLAN-10
encapsulation dot1q 10
ip address 192.168.11.254 255.255.255.0
Please contact me.
Regards,
SK.
Solved! Go to Solution.
03-17-2016 04:45 AM
Only when you have an EtherSwitch module (eg,NM-16ESW: One 16-port 10/100 EtherSwitch Network Module ) and a proper IOS image.
03-17-2016 04:45 AM
Only when you have an EtherSwitch module (eg,NM-16ESW: One 16-port 10/100 EtherSwitch Network Module ) and a proper IOS image.
03-17-2016 05:19 PM
Hi Syed!,
Thank you for your reply!
can you tell me the method that I easily find proper IOS??.. (Now-how)
Regards,
SK.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: