07-24-2015 02:25 AM - edited 03-05-2019 01:56 AM
Hi all,
I'm a Korean engineer and I have problem,,, so I posted this issue.
Was WIC-1T NOT supported on CISCO 2801?
Actually, at first time, The LED on WIC-1T was light on,
But, taking cable from WIC-1T, and after time goes by about 10 minutes, I inserted cable to the WIC-1T again!
No light on...even though these are NEW one..!
Please contact me.
Regards,
07-24-2015 07:24 AM
please provide
sh logg
sh ver
sh inv
07-24-2015 09:59 PM
I'm so sorry ...
I'm on a business trip..
So I'll give you a commands which you want, next Thursday
Thank you so much!
07-27-2015 01:41 AM
hi,
you just need to check via the show diag command. please post the output.
you could also try to reseat (pull out/ insert in) or use the other free WIC slot.
08-04-2015 02:13 AM
Actually, we delivered it a month ago,
However, customer said that it was not worked properly.
No respond, no Light..
So, my customer took back it to us.
Anyway, if the item come to us, I'll give you commands that you required.
Thanks,
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: