cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2354
Views
10
Helpful
5
Replies

cisco 2811 router LAN ports

shaikh ibrahim
Beginner
Beginner

Hi ,

    i would to ask that ,how many extra interface port can be plugged in to the 2811 router ,there are 2 fixed FE port on this router and i have 3 connection

i.e one mpls link , one internet link  and one sip trunk .. some body confirm me  that i can insert module in 2811 ? in order to solve this problem

Thankyou in advance..

SHIB

1 Accepted Solution

Accepted Solutions

Hi Ibrahim,

I prefer to buy a HWIC-4ESW card because you'll never push over a 100Mb of traffic through a 2800 series device.

If you are satisfied then please mark this question as answered.

Regards

please rate if it helps.

View solution in original post

5 Replies 5

Sandeep Choudhary
VIP Mentor VIP Mentor
VIP Mentor

Hi Ibrahim,

If you insert a HWIC-4ESW card then you will get four more fastethernet ports:

FE0/0/0

FE0/0/1

FE0/0/2

FE0/0/3

is this you wanted to know. or somethingelse?

Regards

Please rate if it helps.

yes Thankyou , but one more thing  which type of card for sip trunk should i use? i mean GE or FE?...

As per my knowledge you have to use GE for the SIP trunk.

Regards

Please rate if it helps.

So which card model .i will order??

Hi Ibrahim,

I prefer to buy a HWIC-4ESW card because you'll never push over a 100Mb of traffic through a 2800 series device.

If you are satisfied then please mark this question as answered.

Regards

please rate if it helps.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: