06-15-2012 04:16 AM - edited 03-04-2019 04:41 PM
Hi ,
i would to ask that ,how many extra interface port can be plugged in to the 2811 router ,there are 2 fixed FE port on this router and i have 3 connection
i.e one mpls link , one internet link and one sip trunk .. some body confirm me that i can insert module in 2811 ? in order to solve this problem
Thankyou in advance..
SHIB
Solved! Go to Solution.
06-15-2012 05:06 AM
Hi Ibrahim,
I prefer to buy a HWIC-4ESW card because you'll never push over a 100Mb of traffic through a 2800 series device.
If you are satisfied then please mark this question as answered.
Regards
please rate if it helps.
06-15-2012 04:32 AM
Hi Ibrahim,
If you insert a HWIC-4ESW card then you will get four more fastethernet ports:
FE0/0/0
FE0/0/1
FE0/0/2
FE0/0/3
is this you wanted to know. or somethingelse?
Regards
Please rate if it helps.
06-15-2012 04:36 AM
yes Thankyou , but one more thing which type of card for sip trunk should i use? i mean GE or FE?...
06-15-2012 04:43 AM
As per my knowledge you have to use GE for the SIP trunk.
Regards
Please rate if it helps.
06-15-2012 04:51 AM
So which card model .i will order??
06-15-2012 05:06 AM
Hi Ibrahim,
I prefer to buy a HWIC-4ESW card because you'll never push over a 100Mb of traffic through a 2800 series device.
If you are satisfied then please mark this question as answered.
Regards
please rate if it helps.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide