Cisco 2911 PPTP VPN

[hodgson.c]

I need to forward port 1723 to my VPN server that I have configured so we can access our network via VPN.

I believe I just need to add a NAT record but I want to confirm as well as get the commans to complete this. 

Thanks

[czaja0000]

Hi,

See this link:

http://www.cisco.com/en/US/tech/tk827/tk369/technologies_configuration_example09186a00800949c0.shtml

Check the configuration of the router House:

!--- Static port translation for the Microsoft PPTP server on TCP port 1723
!--- share one public IP address (the address on Fa0/0)

ip nat inside source static tcp 192.168.50.2 1723 interface FastEthernet0/0 1723

P.S.

Remember

If you have built a FW, you have to open port 1723.

Best regards,

MB