Cisco 2921 Modules

[fgasimzade]

Helloe everyone!

Got a question regarding 2921 modules. Can I use VWIC2-2MFT-T1/E1 along with NM-HDV2-2T1/E1 on 2921 and what is the minimum requirements for IOS image?

As I understand, NM-HDV2-2T1/E1 is supported on 2921, however VWIC2-2MFT-T1/E1 is not,  VWIC-2MFT-T1/E1 only. But VWIC-2MFT-T1/E1

is not supported on 2921. Got stuck here.. Please advice

[Reza Sharifi · Accepted solution]

Hi,

According to the data sheet you are correct.  Only NM-HDV2-2T1/E1 is supported on 2900 series.

You also need IOS 15 to support it.

Have a look at the data sheet.

http://www.cisco.com/en/US/products/ps10537/products_relevant_interfaces_and_modules.html

HTH

Reza

[fgasimzade]

Thank you Reza.

What about VWIC2-2MFT-T1/E1?

[fgasimzade]

Oh, it is supported, thank you

[Reza Sharifi]

Looking at the link I provided, it says it is supported, but when you click on the link to look at the detail, there in no 2900 series support at all.

Here it is:

http://www.cisco.com/en/US/prod/collateral/routers/ps5855/product_data_sheet0900aecd8028d2db.html