01-17-2014 08:53 AM - edited 03-04-2019 10:06 PM
Hi Friends,
We are experiencing issue in Cisco 6004 while creating VPC. We are unable to configure VPC because upon enabling the feature it is showing error.
Request if anybody can help us here.
TEST(config)# feature vpc
Error: while enabling/disabling service: vpc, err: (null) (0x4288005c)
************************************************************************************************
TEST# sh license usage
Feature Ins Lic Status Expiry Date Comments
Count
--------------------------------------------------------------------------------
FCOE_NPV_PKG No - Unused -
FM_SERVER_PKG No - Unused -
ENTERPRISE_PKG No - Unused -
FC_FEATURES_PKG No - Unused Grace 117D 4H
VMFEX_FEATURE_PKG No - Unused Grace 117D 5H
ENHANCED_LAYER2_PKG No - Unused -
LAN_BASE_SERVICES_PKG Yes - In use Never -
LAN_ENTERPRISE_SERVICES_PKG No - Unused -
--------------------------------------------------------------------------------
TEST# show feature | i vpc
vpc 1 disabled
TEST# show feature
Feature Name Instance State
-------------------- -------- --------
Flexlink 1 enabled
amt 1 disabled
bfd 1 disabled
bfd_app 1 disabled
bgp 1 disabled
cts 1 disabled
dhcp 1 disabled
dot1x 1 disabled
eigrp 1 disabled
eigrp 2 disabled
eigrp 3 disabled
eigrp 4 disabled
eth_port_sec 1 disabled
extended_credit 1 disabled
fabric-binding 1 disabled
fc-port-security 1 disabled
fcoe 1 disabled
fcoe-npv 1 disabled
fcsp 1 disabled
fex 1 enabled
fport-channel-trunk 1 disabled
glbp 1 disabled
hsrp_engine 1 disabled
http-server 1 disabled
interface-vlan 1 enabled
isis 1 disabled
isis 2 disabled
isis 3 disabled
isis 4 disabled
lacp 1 enabled
ldap 1 disabled
lldp 1 enabled
msdp 1 disabled
npiv 1 disabled
npv 1 disabled
oim 1 disabled
ospf 1 disabled
ospf 2 disabled
ospf 3 disabled
ospf 4 disabled
ospfv3 1 disabled
ospfv3 2 disabled
ospfv3 3 disabled
ospfv3 4 disabled
pbr 1 disabled
pim 1 disabled
poe 1 disabled
port_track 1 disabled
private-vlan 1 disabled
privilege 1 disabled
ptp 1 disabled
rip 1 disabled
rip 2 disabled
rip 3 disabled
rip 4 disabled
scpServer 1 disabled
sftpServer 1 disabled
sshServer 1 enabled
tacacs 1 disabled
telnetServer 1 enabled
udld 1 enabled
vmfex 1 disabled
vpc 1 disabled
vrrp 1 disabled
vtp 1 disabled
TEST#
06-30-2014 02:50 PM
I know this is a few months old so hopefully you already resolved the issue, but for anyone else searching:
Just got off a call with TAC trying to resolve this issue on my 5548UP.
Turns out that you cannot configure VPC if the flexlink feature is enabled. Disabled that feature, and everything worked for me.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: