Cisco 7200 NPE-G2 + shaping + SA-VAM2+

[atis]

Hello,

  I met an interesting issue: there is a Cisco 7200 NPE-G2 with 12.4(24)T7, this router terminates some broadband users, we applied shaping on the virtual-template and we surprised: shaping was not working. We upgraded (downgraded?) to 12.2(33)SRE6 and the shaping was working properly, so I think it is not a config issue.

This router has a SA-VAM2+, but SRE does not support this module.

First question: is it normal, that shaping is not working on virtual-template at 12.4(24)T7?

Second question: is any release which supports shaping on virtual-template and sa-vam2+?

BR, Attila

[ajay chauhan]

Not sure about shaping but it does support VAM2+.

Take a look on feature navigator-

http://tools.cisco.com/ITDIT/CFN/Dispatch?showAllSoftware=true

[atis]

I looked after per user qos on feature navigator, theoretically it is supported on 12.4T. But the theory is different from practice...

-A.

[atis]

We run into CSCsx82371, it won't be fixed in 12.4T, but it is fixed in 15.x

-A.