04-09-2015 07:33 AM - edited 03-05-2019 01:12 AM
Router#wr
Building configuration...
% Cannot communicate boot variable to standby
% Cannot communicate boot variable to standby
% Cannot communicate boot variable to standby
% Cannot communicate boot variable to standby[OK]
This is running on code 122-33.SRB1.
Any suggestions? Have we hit a bug?
Solved! Go to Solution.
04-12-2015 10:04 AM
It could be. Could you please share
sh ver
sh mod
sh boot
sh redundancy
sh log
It seems you may need to reset the standby sup to clear this condition. But please share the above to check.
Thanks,
Madhu.
04-12-2015 10:04 AM
It could be. Could you please share
sh ver
sh mod
sh boot
sh redundancy
sh log
It seems you may need to reset the standby sup to clear this condition. But please share the above to check.
Thanks,
Madhu.
04-13-2015 12:54 AM
Resetting the standby SUP cleared the issue. Thanks
04-13-2015 01:07 AM
Hi,
Thanks for updating and glad to hear its fixed.
Could you please mark this quesiton as answered if no more questions on this.
Thanks,
Madhu,
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide