Hi all,
Recently we purchaged a Cisco 819HG-4G router. Unfortunally I am unable to get the default profile 1 active.
Local Dutch Provider is KPN.
chat-script lte "" "AT!CALL" TIMEOUT 20 "OK"
interface Cellular0
no ip address
encapsulation slip
dialer in-band
dialer string lte
interface Dialer1
ip address negotiated
encapsulation ppp
dialer in-band
dialer string lte
dialer-group 1
ppp chap hostname KPN
ppp chap password 0 KPN
ppp ipcp dns request
ip route 0.0.0.0 0.0.0.0 Dialer1
dialer-list 1 protocol ip list 1
access-list 1 permit any
line 3
exec-timeout 0 0
script dialer lte
no exec
transport input all
transport output all
sh cel 0 profile
Profile 1 = INACTIVE* **
--------
PDP Type = IPv4
Access Point Name (APN) = KPN4G.nl
Authentication = CHAP
Username: KPN
Password: KPN
* - Default profile
** - LTE attach profile
Configured default profile for active SIM 0 is profile 1.
(Also tried with no Athentication and no Username and Password)
sh cel 0 network
Current System Time = Sun Jan 6 0:13:30 1980
Current Service Status = Normal
Current Service = Packet switched
Current Roaming Status = Home
Network Selection Mode = Automatic
Network = KPN
Mobile Country Code (MCC) = 204
Mobile Network Code (MNC) = 8
Packet switch domain(PS) state = Attached
Registration state(EMM) = Registered
Tracking Area Code (TAC) = 12002
Cell ID = 13831948
Primary Scrambling Code = 65535
sh cel 0 sec
Active SIM = 0
SIM switchover attempts = 0
Card Holder Verification (CHV1) = Disabled
SIM Status = OK
SIM User Operation Required = None
Number of CHV1 Retries remaining = 3
Can someone help me to figure this out?
Thanks in advance!
