cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
341
Views
0
Helpful
0
Replies
Highlighted
Beginner

Cisco 867 in half bridged mode

Hello,

My isp provides me with an adsl connection, details as below.

PPPoA

VCMUX

VPI 0

VCI 100

specific un/pass

I need to bridge my cisco867 such that the public ip is passed on to the device plugged into the lan port of the cisco867.

Can anyone provide me with a config to achieve this. By doing this I am totally under utilizing the cisco router but I have to do this, have no other choice.

I have checked other topics and the config does not seem to match or is not suitable for my requirements.

Here I want the cisco router to hold the PPPoA un/pass and authenticate.

My understanding of cisco devices is low to medium.

Any help will be much appreciated.

Regards,

Amit

this is what i use, if i was to NOT bridge the cisco router

*****************************************************************************

!

interface ATM0

no ip address

atm vc-per-vp 128

no atm ilmi-keepalive

pvc 0/100

  encapsulation aal5mux ppp dialer

  dialer pool-member 1

  no shut

!

!

interface FastEthernet0

!

interface FastEthernet1

!

interface FastEthernet2

!

interface FastEthernet3

switchport access vlan 2

ip nat inside

no shutdown

!

interface Vlan1

ip address 192.168.1.1 255.255.255.0

ip access-group 100 in

ip inspect DEFAULT100 in

ip nat inside

ip virtual-reassembly

ip tcp adjust-mss 1380

hold-queue 100 out

!

!

interface vlan2

no shut

ip address 10.12.13.1 255.255.255.0

ip nat inside

!

interface Dialer0

no ip address

!

interface Dialer1

ip address negotiated

ip access-group 103 in

ip nat outside

ip virtual-reassembly

encapsulation ppp

dialer pool 1

dialer-group 1

ppp authentication chap pap callin

ppp chap hostname user@isp.com

ppp chap password abcd123

ppp pap sent-username user@isp.com password abcd1234

hold-queue 224 in

!

********************************************************

Everyone's tags (5)
CreatePlease to create content
Content for Community-Ad
July's Community Spotlight Awards