02-16-2019 03:49 PM
Hi,
Newly configured ASA 5585-x with BGP interface, how does one route all traffic to another interface with the advertised public IP's?
Or does one create VLAN on same BGP interface?
Many thanks in advance for your kind assistance.
Cheers
Geoff
02-16-2019 04:28 PM - edited 02-16-2019 04:28 PM
Depends on where your BGP neighbour resides ? is the BGP neighbout inside interface then you need allow through ACL
if ASA is acting BGP peer then look at the below config :
if my understanding wrong, pelase explain more.
02-16-2019 11:15 PM
Hi BB,
Sorry but article you have shared is not our issue.
We have a number of issues and are trying to methodically work our way through them.
The first issue is we have 2 outside interface 1 is BGP and the other is not BGP, we are currently are unable to execute the following successfully regardless of routes we configure;
# ping outside 8.8.8.8. --> This works
# ping bop-link 8.8.8.8 --> This does not work
Cheers
Geoff
02-17-2019 12:30 AM
Hello,
use Packet Tracer to ping from an inside host (192.168.1.2 in the example below) to 8.8.8.8 and post the output:
packet-tracer input inside icmp 192.168.1.2 8 0 8.8.8.8 detailed
packet-tracer input bop-link icmp 8.8.8.8 0 0 192.168.1.2 detailed
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: