If there are any experts familiar with the cisco command backup interface can you please let me know if its supported on 12000 GSR: IOS (tm) GS Software (C12KPRP-K4P-M), Version 12.0(32)SY7, RELEASE SOFTWARE (fc1)?
I need to know if it can support Gigabitethernet on a 12000 GSR
The official usage guideline from Cisco is as follows:
The interface you define with this command can back up only one other interface.
Routers support only serial and ISDN backup interfaces. Access servers support both asynchronous and serial backup interfaces.
In Cisco IOS Release 12.2(33)SRB1 and later releases, you can configure a backup interface for Gigabit Ethernet on the Cisco 7600 router
However, I just need to know if its supported on 12000 GSR GE's?
Hi,I've had below topology: So from RT1's perspective, if link RT1 - RT5 is the link to be protected, the P-space (RT1, Redlink) will be RT2? I can see the definition of P space of RT1 is the set of nodes that RT1 can reach as per pre-convergenc...
Cisco Champion Radio · S7|E30 Taming Your AI/ ML Workloads with Kubeflow
As organizations increasingly introduce machine learning (ML) capabilities to their existing products, their artificial intelligence (AI) projects and operations complexity g...
Cisco IOS-XE 17.3.1 – Catalyst Switching Updates
Table of Contents
Hardware Additions since IOS-XE 17.2.1
Key Summary Features
Platform and Infra Features
High Availability Features
Routing / MPLS / VPN Features