Re: Cisco c1111-8P and PoE.

Malyukov Maxim · ‎08-29-2018

Hi All!

Recently i bought Cisco c1111-8P. The data sheet says:

But in console:

Router#show power inline gigabitEthernet 0/1/0 detail 
Interface Gi0/1/0: inline power not supported
Router#show power inline gigabitEthernet 0/1/1 detail 
Interface Gi0/1/1: inline power not supported
Router#show power inline gigabitEthernet 0/1/2 detail 
Interface Gi0/1/2: inline power not supported
Router#show power inline gigabitEthernet 0/1/3 detail 
Interface Gi0/1/3: inline power not supported
Router#show power inline gigabitEthernet 0/1/4 detail 
Interface Gi0/1/4: inline power not supported
Router#show power inline gigabitEthernet 0/1/5 detail 
Interface Gi0/1/5: inline power not supported
Router#show power inline gigabitEthernet 0/1/6 detail 
Interface Gi0/1/6: inline power not supported
Router#show power inline gigabitEthernet 0/1/7 detail 
Interface Gi0/1/7: inline power not supported

And:

Router#show power 
Main PSU :
    Configured Mode : N/A
    Current runtime state same : N/A
    PowerSupplySource : External PS
POE Module :
    Configured Mode : N/A
    Current runtime state same : N/A
    Total power available : 0 Watts

Hardware:

Router#show inventory 

+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
INFO: Please use "show license UDI" to get serial number for licensing.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

NAME: "Chassis", DESCR: "Cisco C1111-8P Chassis"
PID: C1111-8P          , VID: V01  , SN: FGL2222944Q

NAME: "Power Supply Module 0", DESCR: "External Power Supply Module"
PID: PWR-12V           , VID: V01  , SN: JAB0929092D

NAME: "module 0", DESCR: "Cisco C1111-8P Built-In NIM controller"
PID: C1111-8P          , VID:      , SN:            

NAME: "NIM subslot 0/0", DESCR: "Front Panel 2 port Gigabitethernet Module"
PID: C1111-2x1GE       , VID: V01  , SN:            

NAME: "NIM subslot 0/1", DESCR: "C1111-ES-8"
PID: C1111-ES-8        , VID: V01  , SN:            

NAME: "module R0", DESCR: "Cisco C1111-8P Route Processor"
PID: C1111-8P          , VID: V01  , SN: FOC22198NGF

NAME: "module F0", DESCR: "Cisco C1111-8P Forwarding Processor"
PID: C1111-8P          , VID:      , SN:

How can this be?

Cisco placed c1100 Series Router in Enterprise segment ( 0_0 ), and w/o SmartNet i can`t get answer from TAC.

In the issue i try buy new device with necessary to me feature, but this feature not in this device, and Cisco said: "Buy our SmartNet too, and we answered about your device is not supported feature" .....

Leo Laohoo · ‎08-29-2018

Check your power supply. A 125w power brick must be used.

Malyukov Maxim · ‎08-30-2018

Can some knows wath part number or model 125W/150W power supply 4pin for topic device?

Leo Laohoo · ‎08-30-2018

Please raise a TAC Case.
The ISR1K is a new model and a lot of the information(s) are scattered all over the place.

Malyukov Maxim · ‎08-31-2018

I bought this device for home use. I didn`t buy smartnet. But Cisco placed ISR1K into enterprise segment, and don`t responed any issues without SmartNet :-(((

Leo Laohoo · ‎08-31-2018

Tell them you're making SALES inquiry.

gebenyol · ‎12-18-2018

If I have the C1111-8PLTEEAWB already out in the field can with 66w of power can the router spare power be be upgraded in the field?

Leo Laohoo · ‎12-18-2018

@gebenyol wrote:

can the router spare power be be upgraded in the field?

Yes, you can get a bigger power brick and upgrade it but this will require a downtime.

Fili · ‎07-31-2020

Cisco PSU for this unit is PWR-66W-AC-V2

Fili · ‎07-31-2020

Cisco PSU for this unit is PWR-66W-AC-V2

Malyukov Maxim · ‎11-20-2018

Unfortunately, a 125w power brick don`t help me.

And in console^

Router#sh power inline gi 0/1/0 detail 
Interface Gi0/1/0: inline power not supported
Router#sh power inline gi 0/1/1 detail 
Interface Gi0/1/1: inline power not supported
Router#sh power inline gi 0/1/2 detail 
Interface Gi0/1/2: inline power not supported
Router#sh power inline gi 0/1/3 detail 
Interface Gi0/1/3: inline power not supported
Router#sh power inline gi 0/1/4 detail 
Interface Gi0/1/4: inline power not supported
Router#sh power inline gi 0/1/5 detail 
Interface Gi0/1/5: inline power not supported
Router#sh power inline gi 0/1/6 detail 
Interface Gi0/1/6: inline power not supported
Router#sh power inline gi 0/1/7 detail 
Interface Gi0/1/7: inline power not supported

Router#sh power 
Main PSU :
    Configured Mode : N/A
    Current runtime state same : N/A
    PowerSupplySource : External PS
POE Module :
    Configured Mode : N/A
    Current runtime state same : N/A
    Total power available : 0 Watts

Router#sh platform diag 
Chassis type: C1111-8P

Slot: 0, C1111-8P
  Running state               : ok
  Internal state              : online
  Internal operational state  : ok
  Physical insert detect time : 00:00:40 (00:43:23 ago)
  Software declared up time   : 00:01:18 (00:42:45 ago)
  CPLD version                : 17100501
  Firmware version            : 16.6(1r)

Sub-slot: 0/0, C1111-2x1GE
  Operational status          : ok
  Internal state              : inserted
  Physical insert detect time : 00:02:09 (00:41:54 ago)
  Logical insert detect time  : 00:02:09 (00:41:54 ago)

Sub-slot: 0/1, C1111-ES-8
  Operational status          : ok
  Internal state              : inserted
  Physical insert detect time : 00:02:09 (00:41:54 ago)
  Logical insert detect time  : 00:02:09 (00:41:54 ago)

Slot: R0, C1111-8P
  Running state               : ok, active
  Internal state              : online
  Internal operational state  : ok
  Physical insert detect time : 00:00:40 (00:43:23 ago)
  Software declared up time   : 00:00:40 (00:43:23 ago)
  CPLD version                : 17100501
  Firmware version            : 16.6(1r)

Slot: F0, C1111-8P
  Running state               : ok, active
  Internal state              : online
  Internal operational state  : ok
  Physical insert detect time : 00:00:40 (00:43:23 ago)
  Software declared up time   : 00:01:52 (00:42:11 ago)
  Hardware ready signal time  : 00:01:08 (00:42:55 ago)
  Packet ready signal time    : 00:01:56 (00:42:07 ago)
  CPLD version                : 17100501
  Firmware version            : 16.6(1r)

Slot: P0, PWR-12V
  State                       : ok
  Physical insert detect time : 00:00:59 (00:43:03 ago)

Slot: GE-POE, Unknown
  State                       : NA
  Physical insert detect time : 00:00:00 (never ago)

Does anyone have any ideas ?

Leo Laohoo · ‎11-20-2018

What firmware is the router running on?

Malyukov Maxim · ‎11-21-2018

Chassis type: C1111-8P

Slot      Type                State                 Insert time (ago) 
--------- ------------------- --------------------- ----------------- 
0         C1111-8P            ok                    17:16:32      
 0/0      C1111-2x1GE         ok                    17:15:07      
 0/1      C1111-ES-8          ok                    17:15:07      
R0        C1111-8P            ok, active            17:16:32      
F0        C1111-8P            ok, active            17:16:32      
P0        PWR-12V             ok                    17:16:14      

Slot      CPLD Version        Firmware Version                        
--------- ------------------- --------------------------------------- 
0         17100501            16.6(1r)                            
R0        17100501            16.6(1r)                            
F0        17100501            16.6(1r)

Cisco IOS Software [Fuji], ISR Software (ARMV8EB_LINUX_IOSD-UNIVERSALK9_IAS-M), Version 16.8.1, RELEASE SOFTWARE (fc3)

Leo Laohoo · ‎11-21-2018

I'd recommend upgrading the firmware.

Malyukov Maxim · ‎11-22-2018

Unfortunately, I can`t download newer IOS without SmartNet.

May be, anyone help me download from https://software.cisco.com/download/home/286315006/type/282046477/release/Fuji-16.9.2 file c1100-universalk9_ias.16.09.02.SPA.bin