04-01-2014 05:19 PM - edited 03-04-2019 10:41 PM
Hello everyone,
I have a router with 2 E1 interfaces, and just aded a 3rd. How can i configure the 3rd interface so that it only recives calls? I need out bount calls to always go thorught either the first and 2nd interface and not the 3rd. Is this configuration going to be made on the interface? voice-port? Dial-peer?
Thanks!
Solved! Go to Solution.
04-02-2014 01:56 AM
You should use trunk-groups with dial-peers config...more on:
HTH,
Dragan
04-02-2014 01:56 AM
You should use trunk-groups with dial-peers config...more on:
HTH,
Dragan
04-02-2014 10:10 AM
Thanks for the response!
I ended up finding a simple solution. I deleted the outgoing call-leg. Will try to implement trunk-groups later though! I think it will help distribuite calls evenly btweeen the interfaces.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide