I want to create EEM to ACL "192.168.1.0/24 next hope 192.168.2.2" starting from 10:00 AM to 11:00 AM
please help me how I create this ACL from EEM
I tried to create EEMS but in my ASR router doesn't show Applet command
please check the details
(config)#eventmanager ? directory Set Embedded Event Manager directory information environment Set an Embedded Event Manager global variable for policies policy Register an Event Manager policy refresh-time Set refresh time (in seconds) for policy username's AAA taskmap scheduler Set Embedded Event Manager scheduler options test-client Embedded Event Manager test-client(cisco-support)
Node Type State Config State ----------------------------------------------------------------------------- 0/RSP0/CPU0 ASR9001-RP(Active) IOS XR RUN PWR,NSHUT,MON 0/FT0/SP ASR-9001-FAN READY 0/0/CPU0 ASR9001-LC IOS XR RUN PWR,NSHUT,MON 0/0/0 A9K-MPA-20X1GE OK PWR,NSHUT,MON 0/PM0/SP A9K-750W-DC READY PWR,NSHUT,MON 0/PM1/SP A9K-750W-DC READY PWR,NSHUT,MON
System image file is "bootflash:disk0/asr9k-os-mbi-5.1.2/0x100000/mbiasr9k-rp.vm"
cisco ASR9K Series (P4040) processor with 8388608K bytes of memory. P4040 processor at 1500MHz, Revision 2.0 ASR-9001 Chassis
iosxr-security, V 5.1.2[Default], Cisco Systems, at disk0:iosxr-security-5.1.2 Built on Wed Apr 30 18:55:22 By iox-lnx-004 in /auto/srcarchive7/production/5.1.2/all/workspace for pie
asr9k-k9sec-supp, V 5.1.2[Default], Cisco Systems, at disk0:asr9k-k9sec-supp-5.1.2 Built on Wed Apr 30 18:55:22
Distribution listsA distribution-list is used to control routing update either coming to your router or leaving from the router. Distribution-lists work on a variety of different IOS routing protocols like EIGRP, RIP, and OSPF. Distribution-li...
Policy Based Routing (PBR) Policy based routing is use to path manipulation. It is used for implementing policy that causes the packet to take a different direction. Policy based routing allows source based routing. Routing table is destin...
BGP community Local-AS Local-AS is a well known BGP community and its use in confederations scenarios to prevent the transmit of traffic outside the local-as. If you are not sure about what is BGP communities are and how its work then I ad...
BGP Communities_No-advertise configuration
The community attribute is a transitive optional attribute. Communities can be used to mark a set of prefixes that share a common property. Any BGP router can tag routes in incoming and out...
BGP route reflector (RR) configuration of two RR servers
We have already learned what route reflector is and why we use route reflector. In this section we will see the configuration of two RR servers and will learn about deep RR behavior...