Cisco Frame Relay, Ping 1 way but not the other?

[WayneDaly9112]

Network is 10.254.0.0/16

snag.gy/3Y8aN.jpg This is the network image.

This is my subnetted connections:

http://snag.gy/BeqUK.jpg

I can ping R2 to R5 but not R5 to R2. I have spent about 10 hours going through my network and code to no avail. I think it is the frame relay that's causing the error but not sure.. I just checked and I think R6 and R5 are not getting their OSPF updates by trying show ip route

Here are my configs:

http://pastebin.com/3QpeEp23

Im awake 28 hours and have the project due in about 30 hours. Gotta love college :/ Anyways any help would be more than amazing, plus I might be able to get some sleep then

Thanks!

[WayneDaly9112]

Here is the packet tracer file

http://www.2shared.com/file/y2hjzKYf/WAN.html

[cadet alain · Accepted solution]

Hi,

R1 s0/1/1 going to ISP has same IP address as R5 s/0/0.504.

Regards

Alain

Don't forget to rate helpful posts.

[WayneDaly9112]

Hm it does not seem to fix it,R5 can only get to R4 and to R6 but not past R4?

[cadet alain]

Hi,

upload your latest PT( with this problem fixed) and post the link here.

Regards

Alain

Don't forget to rate helpful posts.

[WayneDaly9112]

username R3 password CHAP

int s0/0/1

encapsulation ppp

ppp authentication chap

ip address 10.254.0.118 255.255.255.252

ip nat inside

clock rate 64000

no shutdown

exit

--------------------------------

username R1 password CHAP

int s0/0/1

encapsulation ppp

ppp authentication chap

ip address 10.254.0.118 255.255.255.252

ip nat inside

clock rate 64000

no shutdown

exit

could you help me out? im trying ppp encapsulation with chap authentication

[cadet alain]

Hi,

network 10.254.0.32 255.255.255.224

dns-server 8.8.8.8  I don't see any dns-server here

default-router 10.254.0.33

the excluded addresses you configured are not in the pool range !!

Regards

Alain

Don't forget to rate helpful posts.