02-05-2024 09:38 AM - last edited on 02-05-2024 09:52 AM by Jimena Saez
Hello,
I'm new to network administration and currently licensed.
I have a problem with my static routes, I can't ping my router0 with the IT PC.
If I do a show ip config nothing appears on my switch core... I don't understand why, if I have already added routes (you can see them by doing a show run).
The PKT is attached.
Thank you very much for your help.
Solved! Go to Solution.
02-05-2024 10:07 AM
Hello,
on the switch, enable 'ip routing':
Switch#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#ip routing
Switch(config)#end
02-05-2024 10:07 AM
Hello,
on the switch, enable 'ip routing':
Switch#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#ip routing
Switch(config)#end
02-05-2024 10:12 AM
Thank you very much it works! I forgot to activate this on the switch!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide