04-13-2015 02:11 AM - edited 03-05-2019 01:13 AM
Hi,
I unable to configure PfR in my Cisco 1941 Router. Please Help.
Router#sh ver
Cisco IOS Software, C1900 Software (C1900-UNIVERSALK9-M), Version 15.2(4)M6a, RE
LEASE SOFTWARE (fc1)
Thanks,
Yong
04-13-2015 02:17 AM
Router(config)#pf?
% Unrecognized command
04-13-2015 03:30 AM
Hi,
Change your router IOS version to IOS 15.2(3)T. I hope this will work.
Thanks
kafi
04-13-2015 08:06 PM
HI MD,
Noted with Thanks. Will test it out and revert.
04-13-2015 07:19 AM
Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
Don't know for sure, but PfR often wasn't in IPBase images. As you have a Universal image, if feature is supported in that version, it might require a certain license level.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: