cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
223
Views
0
Helpful
0
Replies

CISCO ROUTER 2621xm Failed IOS upload

jeewan0011
Level 1
Level 1

System Bootstrap, Version 12.2(7r) [cmong 7r], RELEASE SOFTWARE (fc1)                                                                     
Copyright (c) 2002 by cisco Systems, Inc.                                         
C2600 platform with 98304 Kbytes of main memory                                               

program load complete, entry point: 0x80008000, size: 0x403b9c                                                              

System Bootstrap, Version 12.2(7r) [cmong 7r], RELEASE SOFTWARE (fc1)                                                                     
Copyright (c) 2002 by cisco Systems, Inc.                                         
C2600 platform with 98304 Kbytes of main memory                                               


monitor: command "boot" aborted due to user interrupt                                                     
rommon 1 > dir flash:                     
         File size           Checksum   File name                                                 
   4209848 bytes (0x403cb8)   0xbdf3    c2600-i-mz.120-7.bin                                                            
rommon 2 > boot flash:c2600-is-mz.123-6c.bin                                            
open: file "c2600-is-mz.123-6c.bin" not found                                             
open(): Open Error = -1                       
loadprog: error - on file open                              
boot: cannot load "flash:c2600-is-mz.123-6c.bin"                                                
rommon 3 > dir flash:c2600-i-mz.120-7.bin                                         

monitor: command "dir" not found                                
rommon 4 > boot flash:c2600-i-mz.120-7.bin                                          
program load complete, entry point: 0x80008000, size: 0x403b9c                                                              

System Bootstrap, Version 12.2(7r) [cmong 7r], RELEASE SOFTWARE (fc1)                                                                     
Copyright (c) 2002 by cisco Systems, Inc.                                         
C2600 platform with 98304 Kbytes of main memory                                               


monitor: command "boot" aborted due to user interrupt                           
rommon 1 > IP_ADDRESS=192.168.1.2
rommon 2 > IP_SUBNET_MASK=255.255.255.0
rommon 3 > DEFAULT_GATEWAY=192.168.1.3
rommon 4 > TFTP_SERVER=192.168.1.1
rommon 5 > TFTP_FILE=c2600-is-mz.123-15a.bin
rommon 6 > tftpdnld

          IP_ADDRESS: 192.168.1.2
      IP_SUBNET_MASK: 255.255.255.0
     DEFAULT_GATEWAY: 192.168.1.3
         TFTP_SERVER: 192.168.1.1
           TFTP_FILE: c2600-is-mz.123-15a.bin

Invoke this command for disaster recovery only.
WARNING: all existing data in all partitions on flash will be lost!
Do you wish to continue? y/n:  [n]:  y

PHY did not complete auto-negotation, status = 0x100
......
ARP: address resolution for 192.168.1.1 timed out.
ARP failed with failure code 1.  TFTP transfer aborted.

TFTP: Operation terminated prematurely.

0 Replies 0
Review Cisco Networking for a $25 gift card