cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
205
Views
0
Helpful
6
Replies
Beginner

cisco router 3925 create xconnect on sub port-channel

hi everybody

i have router 3925 with IOS version c3900-universalk9-mz.SPA.156-3.M4.bin

Technology Package License Information for Module:'c3900'

------------------------------------------------------------------------
Technology    Technology-package                  Technology-package
              Current              Type           Next reboot
------------------------------------------------------------------------
ipbase        ipbasek9             Permanent      ipbasek9
security      None                 None           None
uc            uck9                 Permanent      uck9
data          datak9               Permanent      datak9

and i'm trying create xconnect on sub port channel interfacem, but i can't do it, under sub interface configuration mode absent context xconnect:

(config)#int po1.100
(config-subif)#en
(config-subif)#encapsulation do
(config-subif)#encapsulation dot1Q 100
(config-subif)#x
(config-subif)#x?
% Unrecognized command

how to create xconnect on sub port-channel?
 

6 REPLIES 6
VIP Mentor

Re: cisco router 3925 create xconnect on sub port-channel

Hello,

 

is the data license (which I think is required for xconnect) active and in use ?

 

3925#show license

 

should show something like this:

 

Index 4 Feature: datak9
Period left: Life time
License Type: Permanent
License State: Active, In Use
License Count: Non-Counted
License Priority: Medium

 

 

Beginner

Re: cisco router 3925 create xconnect on sub port-channel

Hello 

yes, data licence is active 

#sh license
Index 1 Feature: ipbasek9
        Period left: Life time
        License Type: Permanent
        License State: Active, In Use
        License Count: Non-Counted
        License Priority: Medium
Index 2 Feature: securityk9
        Period left: Not Activated
        Period Used: 0  minute  0  second
        License Type: EvalRightToUse
        License State: Active, Not in Use, EULA not accepted
        License Count: Non-Counted
        License Priority: None
Index 3 Feature: uck9
        Period left: Life time
        License Type: Permanent
        License State: Active, In Use
        License Count: Non-Counted
        License Priority: Medium
Index 4 Feature: datak9
        Period left: Life time
        License Type: Permanent
        License State: Active, In Use
        License Count: Non-Counted
        License Priority: Medium
Highlighted
Hall of Fame Expert

Re: cisco router 3925 create xconnect on sub port-channel

Hello unfraget,

you have the correct licenses installed and active.

 

I have a question :

the member links of po100 are taken from router ports of the C3925 or are switched ports of an etherswitch module installed on the C3925?

I think this can make the difference between support and lack of support.

 

Hope to help

Giuseppe

 

Beginner

Re: cisco router 3925 create xconnect on sub port-channel

Hi!
my CISCO3925 hasn't an additional module, all port is embedded
VIP Advisor

Re: cisco router 3925 create xconnect on sub port-channel

Hello

Looks like ios version incompatibility problem



kind regards
Paul

Please rate and mark posts accordingly if you have found any of the information provided useful.
It will hopefully assist others with similar issues in the future
Beginner

Re: cisco router 3925 create xconnect on sub port-channel

Hello 

which version is needed?

CreatePlease to create content
Content for Community-Ad
July's Community Spotlight Awards