08-11-2019 11:44 PM - edited 08-11-2019 11:45 PM
hi everybody
i have router 3925 with IOS version c3900-universalk9-mz.SPA.156-3.M4.bin
Technology Package License Information for Module:'c3900' ------------------------------------------------------------------------ Technology Technology-package Technology-package Current Type Next reboot ------------------------------------------------------------------------ ipbase ipbasek9 Permanent ipbasek9 security None None None uc uck9 Permanent uck9 data datak9 Permanent datak9
and i'm trying create xconnect on sub port channel interfacem, but i can't do it, under sub interface configuration mode absent context xconnect:
(config)#int po1.100 (config-subif)#en (config-subif)#encapsulation do (config-subif)#encapsulation dot1Q 100 (config-subif)#x (config-subif)#x? % Unrecognized command
how to create xconnect on sub port-channel?
08-12-2019 01:16 AM
Hello,
is the data license (which I think is required for xconnect) active and in use ?
3925#show license
should show something like this:
Index 4 Feature: datak9
Period left: Life time
License Type: Permanent
License State: Active, In Use
License Count: Non-Counted
License Priority: Medium
08-13-2019 01:20 AM
Hello
yes, data licence is active
#sh license Index 1 Feature: ipbasek9 Period left: Life time License Type: Permanent License State: Active, In Use License Count: Non-Counted License Priority: Medium Index 2 Feature: securityk9 Period left: Not Activated Period Used: 0 minute 0 second License Type: EvalRightToUse License State: Active, Not in Use, EULA not accepted License Count: Non-Counted License Priority: None Index 3 Feature: uck9 Period left: Life time License Type: Permanent License State: Active, In Use License Count: Non-Counted License Priority: Medium Index 4 Feature: datak9 Period left: Life time License Type: Permanent License State: Active, In Use License Count: Non-Counted License Priority: Medium
08-13-2019 02:33 AM - edited 08-13-2019 02:35 AM
Hello unfraget,
you have the correct licenses installed and active.
I have a question :
the member links of po100 are taken from router ports of the C3925 or are switched ports of an etherswitch module installed on the C3925?
I think this can make the difference between support and lack of support.
Hope to help
Giuseppe
08-13-2019 06:09 AM
08-12-2019 01:51 AM
Hello
Looks like ios version incompatibility problem
08-13-2019 01:22 AM
Hello
which version is needed?
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: