11-29-2022 06:24 PM
Can Cisco WLC work if all switch (core, distribution and layer) not using cisco devices?
Solved! Go to Solution.
11-29-2022 11:28 PM
- It will work , the foreign switch is not an issue , for controller and access point compatibility info's check : https://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html , also look into https://www.cisco.com/c/en/us/support/docs/wireless/wireless-lan-controller-software/200046-tac-recommended-aireos.html
M.
11-29-2022 07:41 PM
yes. cisco WLC supports with Cisco APs. underlayer network device brand is not an issue.
11-29-2022 07:51 PM
Hi..
i mean AP still using Cisco but switch which connected to AP and core switch which connected to the WLC is non cisco devices. Still the WLC and AP can work normally?
11-29-2022 10:13 PM
Hello,
which AP/WLC and non-Cisco switch models are in your network ?
11-29-2022 10:15 PM
example WLC 5508 and CAP3802, and for switch we use from HP.
11-29-2022 11:28 PM
- It will work , the foreign switch is not an issue , for controller and access point compatibility info's check : https://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html , also look into https://www.cisco.com/c/en/us/support/docs/wireless/wireless-lan-controller-software/200046-tac-recommended-aireos.html
M.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: