Hi Guys,
Is it possible to get PPPoE working in both the fastethernet and dsl atm interface at the same time? I am trying to do a graceful migration from the old dsl to a new broadband service via ethernet.
I am trying to use VPDN but i get no PPPoE option. Then i try the bba-group and still no pppoe option.
IOS version -
c880data-universalk9-mz.151-4.M4.bin
My current config:
vpdn enable
!
vpdn-group 1
! Default L2TP VPDN group
! Default PPTP VPDN group
accept-dialin
protocol any
!
bba-group pppoe global
!
interface ATM0
no ip address
no atm ilmi-keepalive
!
interface ATM0.1 point-to-point
pvc 8/35
pppoe-client dial-pool-number 1
!
!
interface FastEthernet0
no ip address
pppoe-client dial-pool-number 9
interface Vlan1
no ip address
ip flow ingress
ip virtual-reassembly in
ip tcp adjust-mss 1452
bridge-group 1
!
interface Dialer0
ip address negotiated
ip mtu 1492
ip flow ingress
ip flow egress
ip nat outside
ip virtual-reassembly in
encapsulation ppp
ip tcp adjust-mss 1452
dialer pool 1
dialer-group 1
ppp authentication chap callin
ppp chap hostname eircom.net
ppp chap password 0 band
crypto map mymap
!
interface Dialer9
description UPC
ip address 1.1.1.1 255.255.255.252
ip flow ingress
ip flow egress
ip nat outside
ip virtual-reassembly in
encapsulation ppp
dialer pool 9
dialer-group 9
ppp authentication chap callin
ppp chap hostname UPC
ppp chap password 0 123
!
interface BVI1
ip address 10.4.0.1 255.255.255.0
ip nat inside
ip virtual-reassembly in
Any help would be appreciated!
Thanks,
Alex
