05-23-2011 09:33 AM - edited 03-04-2019 12:30 PM
we need to configure the ASA to access the Exchange Server in the LAN network
we have two static IP provided by ISP one is used for Security software
we need to use the other for exchange server
need your help in configuring the second static ip
05-23-2011 09:45 AM
Hi,
Please post the current configuration and explain a bit more about your topology.
Basic configuraion
!
05-23-2011 11:55 AM
static IP 1 for security
WAN IP # 78.93.60.100
Router IP # 78.93.56.20 255.255.255.252
PC IP # 78.93.56.21 255.255.255.252
static IP 2 for exchange
Network ip address : 78.93.232.58 ?- NOT FOR USE
Router or modem ip address : 78.93.232.59
Pc or server ip address : 78.93.232.60
Broadcast ip address : 78.93.232.591 ?---- NOT FOR USE
Subnet mask ip address : 255.255.255.252
DNS1 : 212.93.192.4
DNS2 : 212.93.192.5
05-26-2011 10:06 AM
Hi,
Sorry for my late reply. Please post the actual IP subnets you've got from ISP.
1. The segment is between the router(lan) and ASA(outside).
What's IP address and Subnet?
2. Have you got any public IP pool from ISP?
I just want to make sure that you have an unused public ip address for an exchange server.
Toshi
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: