cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
106
Views
10
Helpful
2
Replies
Highlighted
Frequent Contributor

Configure IRB/BVI on CSR1000v

So certain commands such as choosing IEEE protocol are not an option. Neither is configuring a VLAN in the VLAN database or adding the "bridge group" to a interface. Not sure if it is this VIRL CSR1000v or what but I can't find documentation for how to configure this on a CSR1000v. Any help?

2 ACCEPTED SOLUTIONS

Accepted Solutions
Highlighted
VIP Mentor

Re: Configure IRB/BVI on CSR1000v

Hello,

 

I think the CSR1000v has VxLAN support only; bridge groups are obsolete, and you need to use bridge domains instead...

View solution in original post

Highlighted
VIP Mentor

Re: Configure IRB/BVI on CSR1000v

Hello
CSR1000v is a router not a switch so no switch virtual interfaces (SVI) and IRB/BVI is now replaced with Bridge Domain Interfaces.(BDI), however ive not checked if this Virl vm supports it.



kind regards
Paul

Please rate and mark posts accordingly if you have found any of the information provided useful.
It will hopefully assist others with similar issues in the future

View solution in original post

2 REPLIES 2
Highlighted
VIP Mentor

Re: Configure IRB/BVI on CSR1000v

Hello,

 

I think the CSR1000v has VxLAN support only; bridge groups are obsolete, and you need to use bridge domains instead...

View solution in original post

Highlighted
VIP Mentor

Re: Configure IRB/BVI on CSR1000v

Hello
CSR1000v is a router not a switch so no switch virtual interfaces (SVI) and IRB/BVI is now replaced with Bridge Domain Interfaces.(BDI), however ive not checked if this Virl vm supports it.



kind regards
Paul

Please rate and mark posts accordingly if you have found any of the information provided useful.
It will hopefully assist others with similar issues in the future

View solution in original post