Configuring backup

[dinesh.walde]

Hi,

Can anyone tell, who can I configure fastethernet as backup interface of serial link. Fast Ethernet is connected to lan, so it cannot be put in standby mode.

Thanks,

Dinesh

[amit-singh]

Hi Dinesh,

Are your serial and FE interfaces going to a different site.Why do you want FE to be you backup, as your FE portis connected to your Lan.

Do you have any special requirement? Let us know more info on it and we will be able to help you.

-amit singh

[mark.edwards]

backup interfaces are normally ISDN, however other interfaces will also work (including ethernet).

Ethernet0/0 is standby mode, line protocol is down

Hardware is AmdP2, address is 0002.4b2c.ea60 (bia 0002.4b2c.ea60)

Internet address is 10.10.10.1/24

MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec,

reliability 255/255, txload 1/255, rxload 1/255