06-15-2009 08:33 AM - edited 03-04-2019 05:07 AM
Hi,
I am seeing the following status on T1 controller after test the circuit with carrier. But the serial interface show up. What does this means? why the controller showing the loop status
Router>show controllers t1 1/1 brief
T1 1/1 is up. (Line looped (inbound CSU code))
Please advice me.
Thanks,
Aru
06-15-2009 08:36 AM
Telco has forgot to remove remove loop code, as the router is telling you.
Reboot and if thats doesn't fix, call telco again.
06-15-2009 08:40 AM
We confirmed with Telco and they have normalized the circuit already. But the same serial interface shows up and i could ping the neighbor end IP without fail.
Thanks,
Aru
06-15-2009 08:53 AM
May be a cosmetic bug, shut / no shut the controller and might go away.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide