Copy flash TFTP Error

terrelstinnett · ‎02-21-2012

I have a 3550 switch that I am trying to upgrade the IOS on.

I am trying to copy to a TFTP server.

I am receiving a socket error.

I saw that this can be fixed with

Switch#config t

Enter configuration commands, one per line. End with CNTL/Z.

Switch(config)#no service config

Switch(config)#exit

Switch#

00:13:47: %SYS-5-CONFIG_I: Configured from console by console

Switch#reload

I have done this 3 times to no avail.

My TFTPd32 server on my pc is working fine.

Here is the error

Switch#sh flas

Directory of flash:/

2 -rwx 556 Mar 1 1993 00:33:53 +00:00 vlan.dat

4 -rwx 3775 Mar 1 1993 00:37:54 +00:00 config.text

5 -rwx 24 Mar 1 1993 00:37:54 +00:00 private-config.text

6 -rwx 5687963 Mar 16 2007 01:05:23 +00:00 c3550-ipbasek9-mz.122-25.SEB4.bin

8 drwx 192 Mar 1 1993 00:04:40 +00:00 c3550-i9q3l2-mz.121-22.EA1a

15998976 bytes total (3300864 bytes free)

Switch#copy flash tftp

Source filename []? c3550-ipbasek9-mz.122-25.SEB4.bin

Address or name of remote host []? 192.168.1.132

Destination filename [c3550-ipbasek9-mz.122-25.SEB4.bin]?

HELP!! THANKS IN ADVANCE

jas2061461 · ‎02-21-2012

Can you ping the server from the switch?

terrelstinnett · ‎02-21-2012

nope, i am consoled into the switch.

my ethernet port is broken.

-----------------------------------------------------

DSW#show int vlan1

Vlan1 is up, line protocol is down

Hardware is EtherSVI, address is 0012.4339.a880 (bia 0012.4339.a880)

Internet address is 192.168.1.133/24

---------------------------------------------------------

DSW#ping 192.168.1.132

Type escape sequence to abort.

Sending 5, 100-byte ICMP Echos to 192.168.1.132, timeout is 2 seconds:

.....

Success rate is 0 percent (0/5)

------------------------------------------------------------

TFTPd32 has no security.

My firewall is turned off.

I dont know whats going on.

Leo Laohoo · ‎02-21-2012

Duplicate post.