cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2250
Views
25
Helpful
9
Replies

Core switches for DR site and DC site

lovejit1313
Level 1
Level 1

Hello Guys,

 

I am looking for a suggestion for 24 Ports 10 GB switch as a Core switch. We are a small manufacturing company not hosting anything else than web servers. Everything else local servers.  

 

Thanks,

 

2 Accepted Solutions

Accepted Solutions

Hello

You don’t state if you have any on-site IT staff or not but if your looking for a L3 switch with 10gb port capacity and to easy manage ,scalable and not as expensive as the new cat9ks suggest possibly look at the meraki cloud switch’s

 

https://meraki.cisco.com/products/switches/ms425-16


Please rate and mark as an accepted solution if you have found any of the information provided useful.
This then could assist others on these forums to find a valuable answer and broadens the community’s global network.

Kind Regards
Paul

View solution in original post

Hello,

 

the C9300-24UX would be an option, it has 24 modular Multigigabit Cisco UPOE (100M, 1G, 2.5G, 5G, or 10 Gbps) ports. Have a look at the datasheet for the Catalyst 9300 series below:

 

https://www.cisco.com/c/en/us/products/collateral/switches/catalyst-9300-series-switches/nb-06-cat9300-ser-data-sheet-cte-en.html

View solution in original post

9 Replies 9

Hello

You don’t state if you have any on-site IT staff or not but if your looking for a L3 switch with 10gb port capacity and to easy manage ,scalable and not as expensive as the new cat9ks suggest possibly look at the meraki cloud switch’s

 

https://meraki.cisco.com/products/switches/ms425-16


Please rate and mark as an accepted solution if you have found any of the information provided useful.
This then could assist others on these forums to find a valuable answer and broadens the community’s global network.

Kind Regards
Paul

Hello @paul driver  

 

We are looking for a fully Manageable switch which can also be utilized as PE in the MPLS scenario. 

 

Thanks

 

 

Hello,

 

the C9300-24UX would be an option, it has 24 modular Multigigabit Cisco UPOE (100M, 1G, 2.5G, 5G, or 10 Gbps) ports. Have a look at the datasheet for the Catalyst 9300 series below:

 

https://www.cisco.com/c/en/us/products/collateral/switches/catalyst-9300-series-switches/nb-06-cat9300-ser-data-sheet-cte-en.html

Martin L
VIP
VIP

I work with 3850s which have large variety of selection. mostly for distribution and access layers but check product site for core level.  

otherwise, I agree with posts above regarding Catalyst 9300  

Leo Laohoo
Hall of Fame
Hall of Fame

@lovejit1313 wrote:

I am looking for a suggestion for 24 Ports 10 GB switch as a Core switch.


Copper or fibre?

Hello @Leo Laohoo  @Georg Pauwen  @paul driver  @Martin L  ,

 

It will be copper, the regular ethernet connections.  I don't see any 24 port switch with all 10 GB ports. please suggest?

I hope you already purchased the Switch.

For future reference you can use below URL in order to know which you need to purchase.

https://www.cisco.com/c/en/us/products/switches/switch-selector.html

24-ports 10GBASE-Tx?
You're looking at a Nexus 5K with a 2K FEX.

Hello @Leo Laohoo  , 

 

I am looking for both copper as well as fiber.

 

Thanks

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card