Dear Experts,
One of the customer is trying to form a L2VPN Vxlan PW between H3c Router and Cisco. Currently we are doing the demo using csr1000v. Can anyone help to advise if this is even possible with cisco (even if not with csr1000v, unlike H3C, they wont push us for demo if we show them its possible)? i am not getting any straight forward configuration. Below is the configuration from h3c side,
l2vpn enable
vsi vpna
vxlan 10
tunnel 1
int loopback 0
ip address 1.1.1.1 255.255.255.255
int tunnel 1 mode vxlan
source 1.1.1.1
destination 2.2.2.2 (remote side)
Interface gig 2/0
xconnect vsi vpna
