cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

180
Views
0
Helpful
1
Replies
Highlighted
Beginner

DCI - Vxlan using L2VPN PW

Dear Experts, 

 

One of the customer is trying to form a L2VPN Vxlan PW between H3c Router and Cisco. Currently we are doing the demo using csr1000v. Can anyone help to advise if this is even possible with cisco (even if not with csr1000v, unlike H3C, they wont push us for demo if we show them its possible)? i am not getting any straight forward configuration. Below is the configuration from h3c side, 

 

l2vpn enable

vsi vpna 

  vxlan 10

    tunnel 1

 

int loopback 0 

  ip address 1.1.1.1 255.255.255.255

 

int tunnel 1 mode vxlan

 source 1.1.1.1 

 destination 2.2.2.2 (remote side)

 

Interface gig 2/0 

 xconnect vsi vpna

 

 

 

 

1 REPLY 1
Highlighted
VIP Mentor

Re: DCI - Vxlan using L2VPN PW

Hello,

 

not sure if the below is what you are looking for, but below is the VxLAN the CSR1000v does support:

 

https://www.cisco.com/c/en/us/td/docs/routers/csr1000/software/vxlan/m_csr-vxlan-support-book.html