05-23-2021 08:13 AM
Hello Guys,
I have 3750x-48 Switch, I created DHCP Pool for Wireless Access Point VLAN as below:
ip dhcp pool WAP
network 10.80.0.0 255.255.248.0
default-router 10.80.7.254
dns-server 8.8.8.8
ip dhcp excluded-address 10.80.0.1 10.80.0.15
I want DHCP IP address pool 2048 IPs.
so i made the subnet 255.255.248.0
network 10.80.0.0 to 10.80.0.254 working fine
The issue when this range is full and the dhcp server start to distribute from 10.80.1.0
the devices connect without accessing.
what did i miss?
all the running configuration is attached
Solved! Go to Solution.
05-23-2021 08:24 AM
Hello
interface Vlan80
ip address 10.80.0.254 255.255.255.0
it should read to accomodate the WAP subnet and dhcp pool
interface Vlan80
ip address 10.80.7.254 255.255.248.0
05-23-2021 08:24 AM
Hello
interface Vlan80
ip address 10.80.0.254 255.255.255.0
it should read to accomodate the WAP subnet and dhcp pool
interface Vlan80
ip address 10.80.7.254 255.255.248.0
05-23-2021 08:32 AM
oh how did i miss this !
thank you for your support
05-23-2021 09:26 AM
Hello
No worries it happens to us all, a second pair of eyes can make all the difference.
Thank you for the rating...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide