07-04-2022 05:32 AM
Hi
I wonder if the "diameter" protocol is supported on ASR1000; I searched but could not find anything.
Thank you
Solved! Go to Solution.
07-04-2022 08:44 AM - edited 07-04-2022 08:45 AM
Hello @natanovic89 ,
the first link provided by @balaji.bandi provides the following information
The Cisco Unified Border Element (SP Edition) supports IP Multimedia Subsystem (IMS) Rx interfaces, Diameter protocol, and IMS Rf interfaces.
I would say you need a Cisco CUBE license to be able to configure and support the feature, the Diameter Protocol looks like to be a component of the CUBE feature.
Hope to help
Giuseppe
07-04-2022 05:55 AM - edited 07-04-2022 05:56 AM
check this configuration guide and version of code running :
07-04-2022 07:59 AM
@balaji.bandi wrote:check this configuration guide and version of code running :
https://www.cisco.com/c/en/us/td/docs/routers/asr1000/configuration/guide/sbcu/2_xe/sbcu_2_xe_book/plafonul-dobanzii-ce-se-va-intampla-cu-piata-finlandeza-de-creditare-anul-acesta.html
checking the instructions yielded nothing(
07-04-2022 08:44 AM - edited 07-04-2022 08:45 AM
Hello @natanovic89 ,
the first link provided by @balaji.bandi provides the following information
The Cisco Unified Border Element (SP Edition) supports IP Multimedia Subsystem (IMS) Rx interfaces, Diameter protocol, and IMS Rf interfaces.
I would say you need a Cisco CUBE license to be able to configure and support the feature, the Diameter Protocol looks like to be a component of the CUBE feature.
Hope to help
Giuseppe
07-04-2022 08:22 PM
Dear All
Thank you for the answers.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide