04-29-2013 07:40 AM - edited 03-04-2019 07:45 PM
What is the difference between the commands "Sh controller t3" and "sh controller serial x/x" ?
They are for the same controller but give different outputs.
XXXXXXXXX>sh controllers t3
T3 1/0 is up.
Applique type is Subrate T3
No alarms detected.
MDL transmission is disabled
FEAC code received: No code is being received
Framing is C-BIT Parity, Line Code is B3ZS, Clock Source is Internal
Data in current interval (320 seconds elapsed):
0 Line Code Violations, 0 P-bit Coding Violation
0 C-bit Coding Violation, 0 P-bit Err Secs
0 P-bit Severely Err Secs, 0 Severely Err Framing Secs
0 Unavailable Secs, 0 Line Errored Secs
0 C-bit Errored Secs, 0 C-bit Severely Errored Secs
Total Data (last 24 hours)
0 Line Code Violations, 0 P-bit Coding Violation,
0 C-bit Coding Violation, 0 P-bit Err Secs,
0 P-bit Severely Err Secs, 0 Severely Err Framing Secs,
0 Unavailable Secs, 0 Line Errored Secs,
0 C-bit Errored Secs, 0 C-bit Severely Errored Secs
================================================
XXXXXXXXX>sh controllers serial 1/0
Interface Serial1/0
Hardware is DSXPNM GT96K
idb at 0x70A20B20, driver data structure at 0x675FA45C
GT96K Port Used 2, SCC Num 2
MPSC Registers:
MMCR_L=0x001B04C0, MMCR_H=0x40000000, MPCR=0x00000000
CHR1=0x00FE007E, CHR2=0x00000000, CHR3=0x000011E2, CHR4=0x00000000
CHR5=0x00000000, CHR6=0x00000000, CHR7=0x00000000, CHR8=0x00000000
CHR9=0x00000000, CHR10=0x00003008, CHR11=0x0083F83C
SDMA Registers:
SDC=0x00003301, SDCM=0x00000080, SGC=0x00000000
CRDP=0x2E568530, CTDP=0x2E568CC0, FTDB=0x2E568CC0
BRG Conf Register=0x00480000
Rx Clk Routing Register=0x00000800 Tx Clk Routing Register=0x00000900
Main Routing Register (MRR) addr=0x4B701A00, val=0x00FFFE3F
GPP Registers:
Conf =0x0000007F, Io =0x00000006, Data =0x7E7E7E47, Level =0x00000000
Conf0=0x0 , Io0=0x0 , Data0=0x7E7EFFFF, Level0=0x0
SUBRATE FPGA Registers (Clear T3/E3):
24674 input aborts on receiving flag sequence
0 throttles, 0 enables
11530 overruns
0 transmitter underruns
0 transmitter CTS losts
349496014 rxintr, 304041902 txintr, 539 rxerr, 0 txerr
0 mpsc_rx, 719 mpsc_rxerr, 0 mpsc_rlsc, 0 mpsc_rhnt, 0 mpsc_rfsc
0 mpsc_rcsc, 719 mpsc_rovr, 0 mpsc_rcdl, 0 mpsc_rckg, 0 mpsc_bper
1 mpsc_txerr, 1 mpsc_teidl, 1 mpsc_tudr, 0 mpsc_tctsl, 0 mpsc_tckg
0 sdma_rx_sf, 0 sdma_rx_mfl, 11530 sdma_rx_or, 24674 sdma_rx_abr, 21520 sdma_rx_no
0 sdma_rx_de, 0 sdma_rx_cdl, 1682864 sdma_rx_ce, 0 sdma_tx_rl, 0 sdma_tx_ur
539 sdma_rx_reserr, 0 sdma_tx_reserr
0 sdma_tx_ur_processed
0 rx_bogus_pkts, rx_bogus_flag FALSE
0 verilink_runts
tx_limited 0, mci_txcount 128, errata19 count1 0, count2 0
txd_incomplete_count = 0
Receive Ring
rxr head (45)(0x2E568530), rxr tail (0)(0x2E568260)
rmd(2E568260): nbd 2E568270 cmd_sts 80800000 buf_sz 05E00000 buf_ptr 2E586400
rmd(2E568270): nbd 2E568280 cmd_sts 80800000 buf_sz 05E00000 buf_ptr 2E573800
<TRUNCATED>
04-29-2013 07:45 AM
Output is different because hardware and circuit have different characteristics.
Howver in most cases the only infromation you are intrested is if the controller status: up or down.
12-15-2014 02:02 PM
Carrier digital signal circuit vs. Serial Data Circuit
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide