Is there a command to see the Rx/Tx light levels from the SFP on a ISR1111-4P?
There is no "sh int gi 0/0/0 transceiver" command
isr1100#show int gi 0/0/0 trans? % Unrecognized command isr1100#sh int gi 0/0/0 trans ^ % Invalid input detected at '^' marker.
The SFP that is plugged in is supporting DOM.
Solved! Go to Solution.
Thank you very match. The command is "show hw-module subslot 0/0 transceiver 0 status"
ISR1100#show hw-module subslot 0/0 transceiver 0 status The Transceiver in slot 0 subslot 0 port 0 is enabled. Module temperature = +41.605 C Transceiver Tx supply voltage = 3288.9 mVolts Transceiver Tx bias current = 21828 uAmps Transceiver Tx power = -6.3 dBm Transceiver Rx optical power = -9.4 dBm