I am trying to build a DMVPN as a backup for our MPLS WAN. The MPLS network is using BGP for its routing protocal and I would also like to use BGP on the DMVPN. The routers in each branch will have a DSL connection on its second ethernet interface. I have a separate 2811 router in the home office that will handle the DMVPN. My question is how can up update the BGP table for all the sites to see the second route through the DMVPN if the MPLS goes down? Should I put static routes into the table using a higher wieght for the DMVPN routes?
The games have begun! Capture the Flag is now open to everyone. Customer Connection program or Meraki community membership are no longer required. Register using the links below. Good luck!
As a part of Cisco Live US auxiliary prog...
Hi,I'm trying to setup a cellular connection on my Cisco 1111 router.The interface is UP and it gets a private IPv4 and a public IPv6 address.If I try to send something on IPv4 through the cellular interface it works fine.But there seems to be an issue wi...
For an offline or printed copy of this document, simply choose ⋮ Options > Printer Friendly Page. You may then Print, Print to PDF or copy and paste to any other document format you like.
Is your WAN ready for a multicloud transformation?
Network Insider Live Webinar
Tuesday, July 21, 2020 10:00 am Pacific Time (San Francisco, GMT-08:00)
This webinar will show how convergence between SD-WAN and Security is emerging as important new SASE a...