Hi all
I have an issue i hope somebody can help me with it. I have a DMVPN setup i am labbing so far with only a single spoke and a hub, at this point the tunnel comes up and EIGRP forms on the hub, but not the spoke. The Hub and spokes are behind NAT routers doing static NAT's. I am using VRF's so maybe this is the issue? Can anybody spot the issue? I see the below on the hub.
Jan 19 15:10:33.012: %DUAL-5-NBRCHANGE: IP-EIGRP(1) 10: Neighbor 10.100.99.61 (Tunnel1) is down: retry limit ex
Jan 19 15:10:37.388: %DUAL-5-NBRCHANGE: IP-EIGRP(1) 10: Neighbor 10.100.99.61 (Tunnel1) is up: new adjacency
Jan 19 15:11:56.900: %DUAL-5-NBRCHANGE: IP-EIGRP(1) 10: Neighbor 10.100.99.61 (Tunnel1) is down: retry limit ex
Jan 19 15:11:59.700: %DUAL-5-NBRCHANGE: IP-EIGRP(1) 10: Neighbor 10.100.99.61 (Tunnel1) is up: new adjacency
*Jan 19 15:29:49.548: %DUAL-5-NBR