Im working on my masters degree project and its basically demonstrating the options to increase network availability and fault tolerance from the base DMVPN phase 3 design of 1HUB/1CLOUD (with no tinkering with things like hold timers).
Ive worked out the basic idea of multi HUB/Cloud setups but i was wanting to know some real world faults to simulate that happen, other than the standard "some idiot dug through the ISP Link".
With a DMVPN solution, in some case scenario, you want to track reliability of the wan links (packet loss, jitter...) and so remove that link from the dmvpn if it is higher than thresholds you've defined. Obviously, this will work better if using multi cloud dmvpn and so multi isp link. Also, what you can show a simple case where a site lose its primary link and so has to route using second tunnel. Some use cases are a site have to connect to 2 hubs and you avoid having both tunnels up the same time, we use clustering so 1 is up and the other will come up when the primary hub doesn't respond anymore.
Thanks Francesco PS: Please don't forget to rate and select as validated answer if this answered your question
We can use multiple options as monitoring jitter, drops, the response time between two endpoints. If you have two different tunnels than you can also divide the load as real-time traffic such as IP-Telephony or any critical application moved over the one tunnel and remaining traffic moved over the other tunnel etc.
Regards, Deepak Kumar, Don't forget to vote and accept the solution If this comment will make help you!
(Pdf copy at the bottom)
Segmentation within SD-Access is enabled through the combined use of both Virtual Networks (VN), which are analogous to VRFs, and Cisco Scalable Group Tags (SGTs). VNs, like VRFs, provide comp...
The 2020 IT Blog Awards, hosted by Cisco, is now open for submissions through October 16. Submit your blog, vlog or podcast today. For more information, including category details, the process, past winners and FAQs, check out: https://www.cisco...
Hello,We have a pair of N3K-3064PQ-10GX and one of them acting as backup and we want to migrate from VyOS to it, we want to add 500x interface vlan and each interface vlan has its own ip/prefixes (for example /30 /29 ...) and we ahve 6-8x BGP session with...
We live in an age that is both thrilling and evolving substantially. A new trend/technology is always on rise even before the preceding has been used to its fullest potential. Although the concepts of digital transformation may seem over discussed, ...
Show CommandPurposeCiscoICX-RuckusShow Spanning tree infoShow spanning-treeshow 802-1wVerify Port-Channel / Link aggregation infosh lag briefsh etherchannel summaryShow CDC/LDP neighbor infoshow cdp neighbors detailsh lldp neighbors de sh mac a...