cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
900
Views
0
Helpful
6
Replies

DNS Settings on 2921

GurrenLagann
Beginner
Beginner

Hello!

I have the cisco 2921 configured with 1 trunk port, on which are: LAN, WAN

So, I can't ping from router any resources with domain name, like google.com, cisco.com

but I can ping them's IP and it's success.

What can be with configuratuion, when ping to IP - success, but to domain name - fails ?

6 REPLIES 6

John Blakley
Advisor
Advisor

There are a couple of things to look at. First, can you ping your dns provider in the image? Also, have you tried changing the primary to another one of google's addresses? (8.8.4.4). Try replacing your 77.232.x.x address with 8.8.4.4 and see if that helps. Do you have any acl's on the wan interface that could be blocking udp traffic for dns or a firewall?

HTH,
John

*** Please rate all useful posts ***

HTH, John *** Please rate all useful posts ***

Hello !

I found, what the error was on 2921.

But know I have an other question.

I have this cisco 2921, and first-connected 2504 with 23 airports.

When I'm in Wi-Fi location, I connect to network, accept the IP, Subnet Mask, GW, DNS..but internet doesn't work.

What can this be ?

Can be this some problems with NAT or anything else.

More than likely it's a nat configuration. Can you post what you have?

HTH,
John

*** Please rate all useful posts ***

HTH, John *** Please rate all useful posts ***

Thank you for the answer. But I resolved this problem. Problem was with NAT, how I said. )

Now I must think, can I update my IOS or not. I have now version 15.2.4 M3.

What version I need to download and flash on cisco ?

Or it is not important, if it works ?

shanilkumar2003
Beginner
Beginner

Hi john make sure you have enabled ip domain-lookup

Sent from Cisco Technical Support iPhone App

GurrenLagann
Beginner
Beginner

Hi,

I found the my error.. that's funny mistake.. )

I was not configured the UDP.. =)

So, I trust, that problem is resolved. I'll test soon.

Thank you for the attention ! =)

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: