cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
5347
Views
10
Helpful
30
Replies
Beginner

Re: Do You Need More Configuration Examples?

Indeed. I dare say that just a couple well thought out configs would cover the wireless features that most netadmins need.

I, for one, would be most happy with sample configurations for WPA2 and WPA2 Enterprise without external server, avoiding the use of IRB, in ISR and ISR-G2 devices.

It's not that the devices are not plug and play... It's that they are unnecessarily hard to configure due to lack of task-oriented documentation and real-life examples. Try this: Choose a netadmin with a pretty decent background in general networking but less wireless experience. Ask him/her to configure say an ISR as access point with WPA2 with shared key using the provided documentation on CCO. Measure time and use of bad words during the experiment.

Re: Do You Need More Configuration Examples?

Dear,

i am happy that we have somewhere to give feed back about this area

first of all Cisco configuration examples in Cisco.com i think its one of the best among other venders in term of documents' layout and examples' details

however i think there are some technologies do not have enough examples such as:

IPCCX

Telepresence specially integration with other systems and Telepresence Recording even in the partner section there are few examples

EEM

PFR   --- I created a configuration example in  netpro as document i think its one of the few detailed examples in this technology !!!

https://supportforums.cisco.com/docs/DOC-8353

Multicasting

some of UC features,   I  mean the new features in CUCM 7 and the coming version 8 ( most of the current documents uses CCM 4)

this is whats at the top of my mind now

thank you for this discussion

regards,

Beginner

Re: Do You Need More Configuration Examples?

Yeah, please I will recommend some confg examples of NAM, Network Analysis Module...

Beginner

Re: Do You Need More Configuration Examples?

Yes!

Could somebody post a configuration of any switch and routers able to support BGP4, I need to simulate a IXP in Bolivia, gathering around 10 ISP, is this info that public? Thanks!

Beginner

Re: Do You Need More Configuration Examples?

How about more config examples showing how to use ISAKMP with RSA-SIG, obtaining cert from MS CA or Verisign and other providers.  

Thx Much!!

Beginner

Re: Do You Need More Configuration Examples?

Thanks for asking. Yes, I'm in need of new configuration examples. My problem at the moment is that I can't find configuration examles for the C4908M and ME4924-10GE switch. The problem is the configuration of the management interface to support tacacs+, ssh, tftp and so on. I found some configuration examples for using inband management with special VFRs and the use of an Loopback interface, but I'm looking for configuration examples using the built in separate management interface of this switch. It would be glad from you, if you can put new configuration examples to CCO.

With kind regards

Stefan Bischoff

Hall of Fame Guru

Re: Do You Need More Configuration Examples?

Janel

Catalyst QOS can be a very confusing subject. It is well documented for each switch type but what i think would be very useful would be a side by side comparison of how MQC classification/marking/queueing/policing etc. can be transferred to a Catalyst configuration.

Obviously you can't always do a straight comparison because the capabilities are not the same but it could still be generalised to an extent.

Jon

Highlighted
Cisco Employee

Re: Do You Need More Configuration Examples?

Hi Jon,

That's great feedback - we really appreciate it!

Beginner

Re: Do You Need More Configuration Examples?

Yes, Cisco has a slew of config examples, but for whatever reason they never seem relevant to me....This could be me....But, I feel Cisco needs to provide more config examples and update older config examples with each IOS release if the features/functionality changes.  I feel that many of the config examples are too "vanilla", "cookie cutter" configs that fail to address "real world" scenarios.

My two cents worth...

Sincerely,

Steve

Cisco Employee

Re: Do You Need More Configuration Examples?

Really appreciate your insight, Steve.

If you have a specific example, please do advise. Thanks!

Beginner

Re: Do You Need More Configuration Examples?

How about a switch and Nac Guest Server Integration Guide, Like The WLC and Nac Guest server integration Guide.

Thanx

Frans

Beginner

Re: Do You Need More Configuration Examples?

Hello,

I have 2 IPS 4270 AND I want to set up for promiscous mode and also failover for this two devices. Do you have a configuration samples? Please if you have kindly give me a samples.

thank you and best regards

Explorer

Re: Do You Need More Configuration Examples?

Dear Janel,

could you provide some configuration examples to configure DNS SRV to provide high availability in a complex VOIP scenario (CallManager, Presence, Unity Connection, IPCC, ...)?

We would like these examples both DNS and appliance side.

Moreover, could you provide some configuration examples to get high availability for some VOIP services, such as CallManger URL directory access?

Is there a way to get that without a load balancer, but only with the use of DNS?

Thanks and regards.

Cisco Employee

Re: Do You Need More Configuration Examples?

Thanks so much for your detailed reply and for contributing to the types of technology areas that need more examples. Your input will help shape our focus - thanks!

Cisco Employee

Re: Do You Need More Configuration Examples?

Just a note to everyone that has so kindly contributed to our configuration example post, if you have ideas or suggestions as to how we can improve documentation, please let us know in the  Tech Doc Ideas Forum: https://supportforums.cisco.com/community/netpro/idea-center/tech-docs.

CreatePlease to create content
Content for Community-Ad
July's Community Spotlight Awards