cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
59
Views
0
Helpful
2
Replies
Highlighted
Beginner

Does 2951 support VPN connectivity by default ?

Problem: I have an old 2851 with VPN module.

Currently, there are IPSEC crypto-connections in use that go through an EIGRP tunnel.

Showing crypto engine br I get: VPN Module (HW) status enabled.

Showing crypto maps, I see that there are leased some active ones.

Showing aaa: there are active sessions.

 

According to the documentation here:

http://www.cisco.com/c/en/us/products/collateral/routers/2900-series-integrated-services-routers-isr/data_sheet_c78_553896.html ,

The 2951 has embeded IPSec support.

The question is: Is a VPN additional module (3DS/AES encryption module) needed for the 2951 or will the connections work without it ?

 

 

Everyone's tags (4)
1 ACCEPTED SOLUTION

Accepted Solutions

Hello.It will work, but

Hello.

It will work, but requires SEC/K9 license (and general image, not NPE):

https://www.cisco.com/c/dam/en/us/products/collateral/routers/3900-series-integrated-services-routers-isr/qa_c67_606268.pdf

Also if you want to do IPSec for traffic rates higher than 85M unidirectional.

2 REPLIES 2

Hello.It will work, but

Hello.

It will work, but requires SEC/K9 license (and general image, not NPE):

https://www.cisco.com/c/dam/en/us/products/collateral/routers/3900-series-integrated-services-routers-isr/qa_c67_606268.pdf

Also if you want to do IPSec for traffic rates higher than 85M unidirectional.

Beginner

Is the same valid for the ISR

Is the same valid for the ISR 4351 series ?

CreatePlease to create content
Content for Community-Ad
July's Community Spotlight Awards