11-13-2017 02:39 PM - edited 03-05-2019 09:28 AM
Hello team i have a doubt about the configuration of VSS.
Let me explain, i have 4 6500 on VSS then i have 2 domain ID, but for a mistake i configured both with the domain ID 100, then both have the same virtual MAC ID, i going to change the domain with the following procedure.
switch virtual domain 10
switch convert mode virtual
After that reset the VSS.
The doubt that i have is, if when i do this change the domain VSS will be destroy and i will need to recreate again or if it is transparent.
Regards and im sorry but i dont speak english
Solved! Go to Solution.
11-15-2017 07:23 AM
its transparent. your steps are accurate. you can go ahead and proceed in the same way. it will fix the issue.
switch virtual domain 10
switch convert mode virtual
After that save config and restart the VSS.
11-15-2017 07:23 AM
its transparent. your steps are accurate. you can go ahead and proceed in the same way. it will fix the issue.
switch virtual domain 10
switch convert mode virtual
After that save config and restart the VSS.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide