08-13-2013 03:07 AM - edited 03-04-2019 08:44 PM
Hello All,
I've been looking for a way to create a point-to-multipoint Tunnels between Hub and Spoke routers until I found assistance here (Configuring Point-to-Multipoint IPSec Tunnels).
After some testing, I realized that the DMVPN won't be sufficient since I will require a backup Hub router. So after searching, I found that this can be done using DUAL DMVPN, but unfortunately, I couldn't find any config guide for that.
I would appreciate someone to provide me with a guide for the DUAL DMVPN.
Solved! Go to Solution.
08-13-2013 04:25 AM
Hi Islam,
Check this
http://www.cisco.com/en/US/docs/solutions/Enterprise/WAN_and_MAN/VPNLoad/ch8_Dual.pdf
HTH,
Lei Tian
Sent from Cisco Technical Support iPhone App
08-13-2013 04:25 AM
Hi Islam,
Check this
http://www.cisco.com/en/US/docs/solutions/Enterprise/WAN_and_MAN/VPNLoad/ch8_Dual.pdf
HTH,
Lei Tian
Sent from Cisco Technical Support iPhone App
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: