Dynamic DNS not updating - Cisco Router 2901

[Deepak Kumar]

Hi All,

I configured DDNS on cisco router with NO-IP services but it is not updating and there is no any debug out showing. 

My configuration as below:

ip name-server 213.42.20.20
ip name-server 195.229.241.222
ip ddns update method no-ip
HTTP
add http://xxxx@xxxxx.com:xxxxxxx@dynupdate.no-ip.com/nic/updatehostname=<h>&myip=<a>.
interval maximum 2 0 0 0
interval minimum 0 6 0 0
!

ip ddns update hostname xxxxx.ddns.net
ip ddns update no-ip

!

!
Please guide and share if any command is missing or any command for forcefully update the DDNS.

Regards,

Deepak Kumar

[nspasov]

Hello Deepak-

It has been a while since I had to do this but I also recall having problems with ddns. As a result, I used IP SLA and it worked great. Have a look at the following link:

http://www.blindhog.net/cisco-routers-and-dynamic-dns/

I hope this helps!

Thank you for rating helpful posts!

[Deepak Kumar]

Hi,

I found that configuration is correct but it needs to reboot device once after configuring DDNS on the cisco router. I rebooted the router and it is working fine. 

Regards,

Deepak Kumar

[nspasov]

Glad you were able to solve your own issue! Also, thank you for taking the time to come back and post the solution here (+5 from me). 

Now, since your issue is resolved, you should mark the thread as "answered" ;)